Policies & IssuesApr 11, 2024
SRK Exports’ Journey Toward Net Zero Impact SourcingApr 09, 2024
Reinvigorating SEEPZ, the Epicenter of India’s Studded Jewelry Exports
The zone’s modernization will enhance and increase India’s jewelry manufacturing capabilities while aiding small and mid-sized businesses.
The Bharat Ratnam Mega Common Facilitation Centre is one of the main features of the revamping and modernization of jewelry manufacturing operations within the special export zone known as SEEPZ in Mumbai.
Mumbai—It is India’s single largest cluster of modern jewelry manufacturing facilities, the engine powering its studded jewelry export industry.
It singlehandedly delivers more jewelry to the United States than most other supplier countries. And it lies in a designated export zone covering less than one square kilometer (less than half a square mile) in Mumbai North-West.
The Santacruz Electronics Export Processing Zone, or SEEPZ as this area is more widely known, is being revamped with a new outlook and infrastructure to “refurbish and rejuvenate” operations, particularly those in the gem and jewelry sector.
The most prominent symbol of SEEPZ 2.0, as it is known, is Bharat Ratnam, a Mega Common Facilitation Centre (CFC) that was inaugurated in January by Indian Prime Minister Narendra Modi.
A senior member of Modi’s cabinet, India’s Minister of Commerce & Industry Piyush Goyal, presided over the commencement-of-operations ceremony in the middle of March, an indication of the importance attached to this project.
The Mega CFC clearly symbolizes the new direction in which India’s studded jewelry export industry is moving. (Studded jewelry refers to jewelry that is set with diamonds and/or colored gemstones and the precious metal content is relatively low.)
The six-floor, 115,000-square-foot complex is a one-stop center that will facilitate the upgrading of what the industry describes as the “three Ts”—technology, techniques, and training – that will be crucial to take jewelry exports to the next level.
Three floors are dedicated to a comprehensive range of cutting-edge technical services including CAD and CAD rendering; 3D printing in metal, ceramic, resin, and wax; and casting in gold, platinum, and silver.
Manufacturers, irrespective of size, can use these machines on a time-share basis.
Colin Shah, a leading jewelry exporter and head of the working group that spearheaded the Bharat Ratnam project, describes it as a “360-degree service model to engage in high-level jewelry manufacturing.”
According to Shah, “This is a pathbreaking concept for democratizing access to entrepreneurs big and small, catering to global and domestic markets.”
According to Shah, “This is a pathbreaking concept for democratizing access to entrepreneurs big and small, catering to global and domestic markets.”
It also has a modern Skill Training Center that will provide over 1,500 personnel with in-depth knowledge of the latest techniques and technology each year, about 25 percent of whom will be individuals with special needs.
Leading exporters believe the Mega CFC will help enhance the quality, diversity, and efficiency of jewelry offerings, and enable scaling up the number of pieces for export, boosting economies of scale for the trade.
The vision of SEEPZ 2.0 also encompasses replacing the 50-year-old buildings with new, modern structures more suited to the current technologies, and fully equipped with state-of-the-art systems.
The New Enterprises & Services Towers, also known as NEST 01, NEST 02 and NEST 03, will consist of three six-floor towers with more than 500,000 square feet of built-out areas. They will rehouse all existing units of the gem and jewelry industry and also offer space to new entrants wishing to set up operations in SEEPZ.
Between 2021-2023, studded jewelry exports from SEEPZ have ranged between $2.75 billion and $3 billion, figures released by India’s Gem & Jewellery Export Promotion Council show, or more than 50 percent of India’s total studded jewelry exports.
According to estimates of the SEEPZ Gem & Jewellery Manufacturers Association (SGJMA) a few years ago, SEEPZ alone enjoyed an approximately 18 percent share of total U.S. studded jewelry imports, or about 80% of the country’s total supply to the U.S. market).
Industry leaders aver that with the better infrastructure and technology, jewelry exports from SEEPZ can be expected to grow exponentially, possibly even reaching between $7 billion and $10 billion in a few years.
Shah, the head of the working group for the Mega CFC, answered more questions from National Jeweler about SEEPZ 2.0 and what it will mean for the future of jewelry manufacturing in India.
National Jeweler: There are a variety of new technologies and machines available in the Mega CFC. Which of these are the most important?
Colin Shah: Among the range of technologies, I would highlight the large 3D metal printers, which are the first of their kind to be installed anywhere in India and, linked to that, the laser color printers, as well as plating facilities in various type of metals and finishes.
Alongside [these] are the lab facilities for testing and certifying durability, strength, and other parameters in studded jewelry.
NJ: What new capabilities will these add to jewelry manufacturing operations in India?
CS: With designing shifting more and more to CAD, I think the advantages of the large [3D] metal printers are quite clear, especially for the MSME (micro, small and medium enterprise) units.
Further, with plating in various colors also becoming possible, smaller manufacturers can take up orders outside their regular areas of expertise. Those doing gold, for example, can now easily take smaller orders of say palladium or titanium, which they earlier would have found difficult to handle or even had to refuse.
As for the lab testing facility, clearly instead of sending new lines to Europe or the Far East for certification … manufacturers will now only have to reach Gate 1 on the border of the zone; so much simpler, faster, and more economical.
NJ: What impact has the vision of SEEPZ 2.0 had on the industry?
CS: The government plans to totally revamp SEEPZ has provided a huge boost to the industry. There is a new vibrancy, and the public-private partnership has worked so well that we got the Mega CFC up and running within 14 months after the start of the project.
Moreover, the construction of NEST 01 and 02 as well as NEST 03, which is in the pipeline, opens new possibilities for smaller units that were facing constraints due to aging infrastructure. The number of units in SEEPZ is likely to go up by the time all three become operational in about a year from now.
With manufacturing units outside the zone also being given access to the Bharat Ratnam facilities, many units there can also take up exports using the e-commerce and postal/courier dispatch mode for smaller orders as well.
Editors' Picks
Sponsored by
More on Sourcing
The Latest
CollectionsApr 26, 2024
Piece of the Week: Jacquie Aiche’s Starry Galaxy NecklaceThe necklace is featured in the brand’s “Rebel Heart” campaign starring Adam Levine and Behati Prinsloo.
Events & AwardsApr 26, 2024
AGS Conclave and GIA Symposium Are ConvergingThe two organizations will host a joint event, “Converge,” in September 2025.
Events & AwardsApr 25, 2024
Alexis Padis Takes Over as AGS Board President Padis succeeds Lisa Bridge, marking the first time the organization has had two women board presidents in a row.
Brought to you by
The Blueprint for Success in Scalable, Personalized Jewelry RetailWith Ho Brothers, you can unlock your brand's true potential and offer customers the personalized jewelry experiences they desire.
EditorsApr 25, 2024
5 Tips for Creating Fans from the Top (Savannah) Banana Jesse Cole, founder of Fans First Entertainment, shared the “five Es” of building a fan base during his AGS Conclave keynote.
Weekly QuizApr 26, 2024
This Week’s QuizTest your jewelry news knowledge by answering these seven questions.
WatchesApr 25, 2024
Audemars Piguet and John Mayer Partner on Limited Edition WatchThe Royal Oak Perpetual Calendar "John Mayer" was celebrated at a star-studded party in LA last week.
MajorsApr 25, 2024
Detroit Lions’ QB Jared Goff Keeps Going to JaredThe three-time Pro Bowler continues to partner with the retailer, donating to a Detroit nonprofit and giving watches to fans.
Brought to you by
How Jewelers of America Represents Your BusinessFor over 30 years, JA has advocated for the industry, fought against harmful legislation and backed measures that help jewelry businesses.
CrimeApr 24, 2024
Jewelry Crime Declines Significantly, But Dollar Losses Remain High A double-digit drop in the number of in-store crimes was offset by a jump in off-premises attacks, JSA’s 2023 crime report shows.
CollectionsApr 24, 2024
Pippa Small Announces ‘Venus’ CollectionInspired by the Roman goddess of love, the designer looked to the sea for her new collection.
FinancialsApr 24, 2024
Kering’s Jewelry Brands a Bright Spot in Tough Q1The luxury titan posted declining sales, weighed down by Gucci’s poor performance.
Events & AwardsApr 24, 2024
JCK Industry Fund Announces 2024 Grant RecipientsThe selected nine organizations have outlined their plans for the funds.
SourcingApr 24, 2024
Rio Tinto’s Q1 Production Drops Amid Pause to Honor Lost Colleagues The mining company’s Diavik Diamond Mine lost four employees in a plane crash in January.
WatchesApr 24, 2024
These Are Rolex’s New Watches for 2024 The crown introduced a dozen timepieces in Geneva, including a heavy metal version of its deep-sea divers’ watch.
ColumnistsApr 23, 2024
The Smart Lab: Advanced Email Marketing Strategies for Mother’s DayEmmanuel Raheb recommends digging into demographic data, customizing your store’s communications, and retargeting ahead of May 12.
IndependentsApr 23, 2024
Hannoush Jewelers Opens New Store in New York Located in the town of Queensbury, it features a dedicated bridal section and a Gabriel & Co. store-in-store.
SourcingApr 23, 2024
Lucapa Sells 3 Diamonds for $10.5M in First Lulo Tender of 2024A 203-carat diamond from the alluvial mine in Angola achieved the highest price.
GradingApr 23, 2024
GIA Has a New Book About William RuserRuser was known for his figural jewelry with freshwater pearls and for his celebrity clientele.
CollectionsApr 22, 2024
Jacquie Aiche’s New Campaign Stars Adam Levine, Behati PrinslooThe “Rebel Heart” campaign embodies rebellion, romance, and sensuality, the brand said.
EditorsApr 22, 2024
The 22 Best Quotes from AGS Conclave 2024 Editor-in-Chief Michelle Graff shares the standout moments from the education sessions she attended in Austin last week.
SourcingApr 22, 2024
Virtual Diamond Boutique Rebrands as ‘VDB’The overhaul includes a new logo and enhanced digital marketplace.
MajorsApr 22, 2024
Signet Raises Nearly $9M for St. Jude Children’s Research HospitalThe money will go toward supporting ongoing research and aftercare programs for childhood cancer survivors.
CollectionsApr 19, 2024
Piece of the Week: Retrouvaí’s Treasure NecklaceA new addition to the “Heirloom” collection, this one-of-a-kind piece features 32 custom-cut gemstones.
CrimeApr 19, 2024
Grand Jury to Hear Case Against Jeweler Charged in Fatal Shove Following IJO ShowLast month in Dallas, David Walton pushed another jeweler, David Ettinger, who later died.
MajorsApr 19, 2024
Unique Designs Acquires China PearlThe move will allow the manufacturing company to offer a more “diverse and comprehensive” range of products.
GradingApr 19, 2024
AGS Ideal Report Now Available in Printed FormFrom now through mid-May, GIA will be offering the reports at a 50 percent discount.
SourcingApr 18, 2024
Diamond Trade Remains Cautious Amid Economic UncertaintyDe Beers’ rough diamond sales were down 18 percent year-over-year in its latest round of sales.
